Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 10783

Siemens 10783 - Block tool radius compensation type requires orientation

This alarm occurs, if an attempt is made to activate a tool radius compensation which must enable a tool orientation change and the _Orientation transformation_ option is not available. This alarm can only occur if one of the following G code is active in the G code group 22: - CUT3DC - CUT3DCC - CUT3DCCD Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. NC Stop on alarm at block end.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

10783

Siemens 10783 - Block tool radius compensation type requires orientation

Block tool radius compensation type requires orientation

This alarm occurs, if an attempt is made to activate a tool radius compensation which must enable a tool orientation change and the _Orientation transformation_ option is not available. This alarm can only occur if one of the following G code is active in the G code group 22: - CUT3DC - CUT3DCC - CUT3DCCD Control reaction: Correction block is reorganized. Local alarm reaction. Interface signals are set. Alarm display. NC Stop on alarm at block end.

Safety

  • Only qualified personnel should diagnose and clear control alarms; follow the machine builder's safety procedures and lockout/tagout where hardware work is required.

Common Causes

  • This alarm occurs, if an attempt is made to activate a tool radius compensation which must enable a tool orientation change and the _Orientation transformation_ option is not available.
  • This alarm can only occur if one of the following G code is active in the G code group 22: - CUT3DC - CUT3DCC - CUT3DCCD

Troubleshooting Steps

  1. 1Modify part program - Install "Orientation transformation" option
  2. 2Clear alarm with NC START or RESET key and continue the program

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.