105031

Common Causes

• Insufficient available memory in the CNC control unit for part program storage
• Part program exceeds maximum allowable size for renumbering operation
• Memory allocation conflict with active background tasks or system processes
• Corrupted memory sectors preventing proper renumbering sequence completion
• Part program contains unsupported syntax or extended characters that consume additional memory during renumbering

Troubleshooting Steps

1. 1Check available memory status in the CNC control: navigate to Diagnostics menu and verify free memory allocation in program storage area
2. 2Delete unnecessary part programs, backup files, or temporary files from the control's memory to free up space
3. 3Reduce part program complexity by breaking it into smaller sub-programs or removing redundant code blocks before attempting renumbering again
4. 4Power cycle the CNC control unit to clear memory cache and reset memory allocation, then retry the renumbering operation
5. 5If issue persists, back up critical programs externally and perform a memory initialization or factory reset on the control unit as a last resort