Siemens SINUMERIK codes
AxisMD

axismd.ai

Siemens SINUMERIK Controller

Program/G-code · Intermediate · 30-120 minutes

Alarm 105022

Siemens 840D 105022 - Error on enable!

Siemens SINUMERIK message 105022: Error on enable!. This is an operator information message from the SINUMERIK control. Note the complete message text as it may contain important parameter values.

Siemens SINUMERIKProgram/G-codeIntermediate30-120 minutes

105022

Siemens 840D 105022 - Error on enable!

Error on enable!

Siemens SINUMERIK message 105022: Error on enable!. This is an operator information message from the SINUMERIK control. Note the complete message text as it may contain important parameter values.

Safety

  • Refer to Siemens documentation
  • Ensure qualified technician performs repairs

Common Causes

  • Normal control operation generated this status message
  • User action or program command triggered this notification
  • System configuration or commissioning activity produced this message
  • Machine data or parameter change created this notification

Troubleshooting Steps

  1. 1Read the complete message text on the SINUMERIK screen — note any parameter values shown.
  2. 2If action is required, follow the instructions in the message.
  3. 3Acknowledge the message on the operator panel to continue operation.
  4. 4Consult the Siemens SINUMERIK alarm documentation for message 105022 if clarification is needed.
  5. 5If this message appears unexpectedly, review recent parameter or configuration changes.

Seeing Multiple Alarms?

Seeing another alarm with this one? Enter the code.

Get machine-aware diagnosis

AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.

Start free

Was this guide helpful?

Always verify with your machine manual or a certified technician before performing service procedures.