axismd.ai
Siemens SINUMERIK Controller
Program/G-code · Intermediate · 30-120 minutes
Siemens 840D 101301 - Versions saved -> output via
Alarm 101301 is an informational message, not an error. It indicates that version data (software, PLC, NC configuration, or machine data) has been successfully saved to the specified output location indicated by parameter %1, which could be a network path, CF card, USB drive, or other storage medium.
101301
Siemens 840D 101301 - Versions saved -> output via
Versions saved -> output via
Siemens SINUMERIK message 101301: Versions saved -> output via. This is an operator information message from the SINUMERIK control. Note the complete message text as it may contain important parameter values.
Root Cause Summary
Alarm 101301 is an informational message, not an error. It indicates that version data (software, PLC, NC configuration, or machine data) has been successfully saved to the specified output location indicated by parameter %1, which could be a network path, CF card, USB drive, or other storage medium.
Safety
- Refer to Siemens documentation
- Ensure qualified technician performs repairs
Causes and Fixes
- 1
Acknowledge the alarm by pressing the 'Cancel Alarm' or 'Recall' key on the machine control panel.
- 2
Verify the output location specified in %1 parameter (check HMI alarm details for the complete path).
- 3
Navigate to the specified storage location and confirm the presence of archived version files (typically .ARC, .INI, or dated folder structures).
- 4
Document the backup location and timestamp for maintenance records. No further corrective action required.
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.