axismd.ai
Heidenhain Controller
Communication · Advanced
HEIDENHAIN 234-0004 - Internal software error
This TNC7/TNC 640 system error indicates Not enough memory for the job at hand. The control has detected an abnormal state that requires attention.
234-0004
HEIDENHAIN 234-0004 - Internal software error
Internal software error
This TNC7/TNC 640 system error indicates Not enough memory for the job at hand. The control has detected an abnormal state that requires attention.
Common Causes
- Not enough memory for the job at hand
Troubleshooting Steps
- 1Note the full error text and the NC software number of the control
- 2Check the HSCI cable connections
- 3Contact your machine builder or HEIDENHAIN service
Seeing Multiple Alarms?
Seeing another alarm with this one? Enter the code.
Get machine-aware diagnosis
AxisMD logs alarms against your actual machines, tracks patterns, and gives AI context your manual doesn't have.
Start freeWas this guide helpful?
Always verify with your machine manual or a certified technician before performing service procedures.